If you are considering painting or repainting your house, this question has probably crossed your mind. What is the difference between painting and whitewashing? Why should I use whitewash instead of paint? Isn’t whitewashing an out-of-date technique? Will whitewash make my house look old?
Is it time to change the color of the walls? Are you looking for advice on how to whitewash your home the right way? Keep reading this article for information and useful tips on how to have a quality result at the best price from professional painters Gikas Painting in Montclair.
How to whitewash the house? of
Whether you decide to carry out the project yourself or with the help of an expert, it is always useful to know how to proceed with the whitewashing of the walls of the house. This procedure is very simple but requires some important attention that allows you to obtain a quality and lasting result.
The painting consists of several phases:
- the choice of materials
- the preparation of the wall
- the drafting of the painting
How to choose the materials for whitewashing the house?
Every paint project begins with selecting the paint to use. In this initial phase, you will need to have a precise idea of the result you want. Do you want a simple house whitening or something special like sponging or scratching?
For these last effects, it is always recommended to ask for help from an expert. In fact, making them yourself can take a long time and the result may not be what you want. Once decisions have been made about the aesthetics of the paint, any problems with the wall need to be considered.
For example, if mold is present, you will need to opt for a breathable paint in order to fix the problem permanently. However, it is always useful to ask an expert for advice on choosing the paint.
How to prepare the wall in the right way?
When you start whitewashing the house, the preparation of the wall is a fundamental operation for the success of the entire project. It starts by removing the surface layer of paint whenever possible.
At this point, you will be aware of any mold, cracks, or other imperfections on the wall. For the first, it will be necessary to carry out a small reclamation of the area using special products.
It is also important to check the cause of the mold: is it due to infiltration or reduced air circulation in the room? In the first case, contact an expert to solve the problem, while in the second it will be enough to use breathable paints.
Then continue with the smoothing and smoothing of the surface, this last procedure will allow the correct drafting of the new layer of paint.
How to apply paint on the walls of the house?
After choosing the materials and preparing the surface, all that remains is to start whitewashing the house. Remember to carefully protect the floor, especially if you have a parquet, cover the furniture with a plastic sheet and move it to the center of the room.
Start by painting the difficult spots such as room corners, areas behind radiators, or near door and window profiles. If you use a brush, always proceed in the same direction. With the roller, on the other hand, it is recommended to spread the paint vertically and horizontally in order to have a uniform result.
Some paints have an excellent yield and, consequently, it is not necessary to carry out a second coat. To whiten the house with some paints, it is always recommended to carry out two or three coats, depending on the quality of the product.
The importance of home whitening tools
To get a perfect result it is important to have the right tools. If you choose to use brushes, remember to opt for those with thick bristles that make it easier to apply the paint. In addition, you can choose between synthetic or natural bristles. The former is more resistant and particularly suitable for applying enamels, while natural bristles are recommended if water-based paints are used.
If you use the roller, you will have the possibility to choose between different sleeves, the part that will be dipped in the paint and passed on the wall. There are those with long bristles, suitable for non-smooth walls, and those with short bristles, which reduce smudging and give a uniform effect.
If you want to create a particular decoration, you can choose honeycomb or relief sleeves, which create the desired designs on the wall. The fibers used for the rollers can be, as for the brushes, synthetic and natural: the latter are suitable for whitening the house because they have a better performance.
Contact the experts and start your home whitewashing project!
If you want to paint your home quickly and without problems, rely on the services of a house painter.